Reference Guide

1122 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
show logging driverlog stack-unit (S-Series)
s z
Display the driver log for the specified stack member.
Syntax
show logging driverlog stack-unit unit#
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
This command displays internal software driver information, which may be useful during
troubleshooting switch initialization errors, such as a downed Port-Pipe.
terminal monitor
c e s z
Configure the FTOS to display messages on the monitor/terminal.
Syntax
terminal monitor
To return to default settings, enter terminal no monitor.
Defaults
Disabled.
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
stack-unit unit# Enter the keyword stack-unit followed by the stack member ID of the switch for
which you want to display the driver log.
Unit ID range:
S4810: 0-11
all other S-Series: 0-7
Version 8.3.11.1 Introduced on Z9000
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced for S-Series
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging monitor Set the logging parameters on the monitor/terminal.