Reference Guide

VLAN Stacking | 1161
Command
History
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
dei mark
c s
z
Set the DEI value on egress according to the color currently assigned to the packet.
Syntax
dei mark {green | yellow} {0 | 1}
Parameters
Defaults
All the packets on egress will be marked with DEI 0.
Command Mode
INTERFACE
Command
History
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
member
c e s z
Assign a Stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack
compatible command in its configuration.
Syntax
member interface
To remove an interface from a Stackable VLAN, use the no member interface command.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810.
Version 8.3.1.0 Introduced on C-Series and S-Series.
dei enable
Make packets eligible for dropping based on their DEI value
0 | 1 Enter the bit value you want to map to a color.
green |
yellow
Choose a color:
• Green: High priority packets that are the least preferred to be dropped.
• Yellow: Lower priority packets that are treated as best-effort.
Version 8.3.11.1 Introduced on Z9000.
Version 8.3.7.0 Introduced on S4810.
Version 8.3.1.0 Introduced on C-Series and S-Series.
dei enable
Make packets eligible for dropping based on their DEI value.