Reference Guide

Z-Series Debugging and Diagnostics | 1189
The system reboots when the off-line diagnostics complete. This is an automatic process. A warning
message appears when the offline stack-unit command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot after
completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
online stack- unit
s z
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
Defaults
None
Command Mode
EXEC Privilege
Command History
H
Related
Commands
Buffer Tuning Commands
The buffer tuning commands are:
• buffer (Buffer Profile)
• buffer (Configuration)
• buffer-profile (Configuration)
• show buffer-profile
• show buffer-profile
• show buffer-profile stack-unit
number
Enter the stack unit number.
Unit ID range:
S4810 range: 0-11
Z9000 range: 0
Version 8.3.11.1 Introduced on Z9000
Version 7.7.1.0 Introduced on S-Series
show environment (S-Series) View S-Series system component status (for example, temperature, voltage).
Warning: Altering the buffer allocations is a sensitive operation. Do not use any buffer
tuning commands without first contacting the Dell Force10 Technical Assistance
Center.