Reference Guide

Control and Monitoring | 133
Related
Commands
show software ifm
c s z
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit
unit-ID | trace-flags}
Jumbo Capable Displays a Yes or No indicating if the RPM is capable of sending and
receiving Jumbo frames.
This field does not indicate if the chassis is in Jumbo mode; for that
determination, use the show chassis brief command.
CP Boot Flash Displays the two possible Boot Flash versions for the Control
Processor. The [Booted] keyword next to the version states which
version was used at system boot.
RP1 Boot Flash Displays the two possible Boot Flash versions for the Routing
Processor 1. The [Booted] keyword next to the version states which
version was used at system boot.
RP2 Boot Flash Displays the two possible Boot Flash versions for the Routing
Processor 2. The [Booted] keyword next to the version states which
version was used at system boot.
CP Mem Size Displays the memory of the Control Processor.
RP1 Mem Size Displays the memory of the Routing Processor 1.
PR2 Mem Size Displays the memory of the Routing Processor 2.
Temperature Displays the temperature of the RPM.
Minor alarm status if temperature is over 65° C.
Power Status Lists the status of the power modules in the chassis.
Voltage Displays the power rails for the line card.
Serial Num Displays the line card serial number.
Part Num Displays the line card part number.
Vendor ID Displays an internal code, which specifies the manufacturing vendor.
Date Code Displays the line card’s manufacturing date.
Country Code Displays the country of origin.
01 = USA
Table 4-7. Descriptions of show rpm output
Field Description
show chassis View information on all elements of the system.
show linecard View information on a line card.
show sfm View information on the SFM.