Reference Guide

802.1X | 159
dot1x authentication (Configuration)
c e
t
s
Enable dot1x globally; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on an globally, use the
no dot1x authentication command.
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
dot1x authentication (Interface)
c e
t
s
Enable dot1x on an interface; dot1x must be enabled both globally and at the
interface level.
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x guest-vlan
c e s
Configure a guest VLAN for limited access users or for devices that are not 802.1X
capable.
Syntax
dot1x guest-vlan vlan-id
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series TeraScale
dot1x authentication (Interface) Enable dot1x on an interface.
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
dot1x authentication (Configuration) Enable dot1x globally.