Reference Guide

802.1X | 163
Parameters
Defaults
No default behavior or values
Command Modes
Auto
Command
History
Usage
Information
The authenticator performs authentication only when port-control is set to auto.
dot1x quiet-period
c e s
Set the number of seconds that the authenticator remains quiet after a failed
authentication with a client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
Defaults
60 seconds
Command Modes
INTERFACE
Command
History
dot1x reauthentication
c e s
Enable periodic re-authentication of the client.
Syntax
dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication command.
force-authorized Enter the keyword force-authorized to forcibly authorize a port.
auto Enter the keyword auto to authorize a port based on the 802.1X
operation result.
force-unauthorized Enter the keyword force-unauthorized to forcibly de-authorize a port.
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds Enter the number of seconds.
Range: 1 to 65535
Default: 60
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series