Reference Guide

Access Control Lists (ACL) | 249
set metric
c e s z
Configure a filter to assign a new metric to redistributed routes.
Syntax
set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Related
Commands
set metric-type
c e s z
Configure a filter to assign a new route type for routes redistributed to OSPF.
Syntax
set metric-type {internal | external | type-1 | type-2}
To delete a setting, enter no set metric-type.
Parameters
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
metric-value
Enter a number as the new metric value.
Range: zero (0) to 4294967295
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
set automatic-tag Compute the tag value of the route.
set level Specify the OSPF area for route redistribution.
set metric-type Specify the route type assigned to redistributed routes.
set tag Specify the tag assigned to redistributed routes.
internal Enter the keyword internal to assign the Interior Gateway Protocol metric of the next
hop as the route’s BGP MULTI_EXIT_DES (MED) value.
external Enter the keyword external to assign the IS-IS external metric.
type-1 Enter the keyword type-1 to assign the OSPF Type 1 metric.
type-2 Enter the keyword type-2 to assign the OSPF Type 2 metric.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0
Implemented
internal keyword