Reference Guide

Border Gateway Protocol | 303
Command
History
debug ip bgp events
c e s z
Display information on local BGP state changes and other BGP events.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
events command.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Command
History
debug ip bgp keepalives
c e s z
Display information about BGP keepalive messages.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out] command.
Parameters
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the
peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound BGP
messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound BGP
messages.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the
peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive
messages.