Reference Guide

334 | Border Gateway Protocol
www.dell.com | support.dell.com
Example
Figure 8-7. show ip bgp Command Example (Partial)
Table 8-1 defines the information displayed in Figure 8-7
Related
Commands
Command
History
FTOS>show ip bgp
BGP table version is 847562, local router ID is 63.114.8.131
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 63.114.8.33 0 18508 i
* 3.0.0.0/8 63.114.8.33 0 18508 209 701 80 i
*> 63.114.8.33 0 18508 701 80 i
*> 3.3.0.0/16 0.0.0.0 22 32768 ?
63.114.8.35 0 18508 ?
*> 4.0.0.0/8 63.114.8.33 0 18508 701 1 i
*> 4.2.49.12/30 63.114.8.33 0 18508 209 i
* 4.17.250.0/24 63.114.8.33 0 18508 209 1239 13716 i
*> 63.114.8.33 0 18508 701 1239 13716 i
* 4.21.132.0/23 63.114.8.33 0 18508 209 6461 16422 i
*> 63.114.8.33 0 18508 701 6461 16422 i
*> 4.24.118.16/30 63.114.8.33 0 18508 209 i
*> 4.24.145.0/30 63.114.8.33 0 18508 209 i
*> 4.24.187.12/30 63.114.8.33 0 18508 209 i
*> 4.24.202.0/30 63.114.8.33 0 18508 209 i
*> 4.25.88.0/30 63.114.8.33 0 18508 209 3561 3908 i
*> 5.0.0.0/9 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/10 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/11 63.114.8.33 0 0 18508 ?
--More--
Table 8-1. show ip bgp Command Example Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
show ip bgp community View BGP communities.
neighbor maximum-prefix Control number of network prefixes received.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Added the add-path option to the S4810. Output on the S4810 shows ADDPATH
parameters.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series