Reference Guide

338 | Border Gateway Protocol
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Example
Figure 8-10. Command Example: show ip bgp community-list
The show ip bgp community-list command without any parameters lists BGP routes matching the
Community List and the output is the same as for the show ip bgp command output.
Command
History
show ip bgp dampened-paths
c e s z
View BGP routes that are dampened (non-active).
Syntax
show ip bgp [ipv4 unicast] dampened-paths
Command Modes
EXEC
EXEC Privilege
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only
related to ipv4 unicast routes.
community-list-name
Enter the name of a configured IP community list. (max 16 chars)
exact-match
Enter the keyword for an exact match of the communities.
FTOS#show ip bgp community-list pass
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
FTOS#
Table 8-4. show ip bgp community-list Command Example Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series