Reference Guide

Border Gateway Protocol | 353
Example
Figure 8-24. Command Example: show ip bgp paths community (Partial)
Command
History
show ip bgp peer-group
c e s z
Enables you to view information on the BGP peers in a peer group.
Syntax
show ip bgp [ipv4 unicast] peer-group [peer-group-name [detail | summary]]
Parameters
Table 8-13. Command Example fields: show ip bgp paths community
Field Description
Address Displays the internal address where the path attribute is stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using these communities.
Community Displays the community attributes in this BGP path.
E1200-BGP>show ip bgp paths community
Total 293 Communities
Address Hash Refcount Community
0x1ec88a5c 3 4 209:209 209:6059 209:31272 3908:900 19092:300
0x1e0f10ec 15 4 209:209 209:3039 209:31272 3908:900 19092:300
0x1c902234 37 2 209:209 209:7193 209:21362 3908:900 19092:300
0x1f588cd4 41 24 209:209 209:6253 209:21362 3908:900 19092:300
0x1e805884 46 2 209:209 209:21226 286:777 286:3033 1899:3033
64675:21092
0x1e433f4c 46 8 209:209 209:5097 209:21362 3908:900 19092:300
0x1f173294 48 16 209:209 209:21226 286:40 286:777 286:3040 5606:40
12955:5606
0x1c9f8e24 50 6 209:209 209:4069 209:21362 3908:900 19092:300
0x1c9f88e4 53 4 209:209 209:3193 209:21362 3908:900 19092:300
0x1f58a944 57 6 209:209 209:2073 209:21362 3908:900 19092:300
0x1ce6be44 80 2 209:209 209:999 209:40832
0x1c6e2374 80 2 209:777 209:41528
0x1f58ad6c 82 46 209:209 209:41528
0x1c6e2064 83 2 209:777 209:40832
0x1f588ecc 85 570 209:209 209:40832
0x1f57cc0c 98 2 209:209 209:21226 286:3031 13646:1044 13646:1124
13646:1154 13646:1164 13646:1184 13646:1194 13646:1204 13646:1214 13646:1224
13646:1234 13646:1244 13646:1254 13646:1264 13646:3000
0x1d65b2ac 117 6 209:209 209:999 209:31272
0x1f5854ac 119 18 209:209 209:21226 286:108 286:111 286:777 286:3033
517:5104
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ipv4 unicast
(OPTIONAL) Enter the
ipv4 unicast keywords to view information only
related to ipv4 unicast routes.
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about that peer
group only.
detail (OPTIONAL) Enter the keyword detail to view detailed status information of the
peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information of the
peers in that peer group.
The output is the same as that found in show ip bgp summary command