Reference Guide

360 | Border Gateway Protocol
www.dell.com | support.dell.com
• neighbor distribute-list
• neighbor filter-list
• neighbor maximum-prefix
• neighbor next-hop-self
• neighbor remove-private-as
• neighbor route-map
• neighbor route-reflector-client
• network
• redistribute
• redistribute ospf
• show ip bgp ipv4 multicast
• show ip bgp cluster-list
• show ip bgp community
• show ip bgp community-list
• show ip bgp dampened-paths
• show ip bgp filter-list
• show ip bgp flap-statistics
• show ip bgp inconsistent-as
• show ip bgp ipv4 multicast neighbors
• show ip bgp peer-group
• show ip bgp summary
address family ipv4 multicast (MBGP)
c e
t
s
This command changes the context to SAFI (Subsequent Address Family Identifier).
Syntax
address family ipv4 multicast
To remove SAFI context, use the no address family ipv4 multicast command.
Parameters
Defaults
IPv4 Unicast
Command Modes
ROUTER BGP (conf-router_bgp)
Usage
Information
All subsequent commands will apply to this address family once this command is executed. You can
exit from this AFI/SAFI to the IPv4 Unicast (the default) family by entering exit and returning to the
Router BGP context.
Command
History
ipv4 Enter the keyword ipv4 to specify the address family as IPV4.
multicast Enter the keyword multicast to specify multicast as SAFI.
Version 7.8.1.0 Introduced support on S-Series for MBGP IPv4 Multicast
Version 7.7.1.0 Introduced support on C-Series