Reference Guide

370 | Border Gateway Protocol
www.dell.com | support.dell.com
Command
History
neighbor remove-private-as
c e
t
s
Remove private AS numbers from the AS-PATH of outgoing updates.
Syntax
neighbor ip-address | peer-group-name remove-private-as
To return to the default, use the no neighbor ip-address | peer-group-name remove-private-as
command.
Parameters
Defaults
Disabled (that is, private AS number are not removed).
Command Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
neighbor route-map
c e
t
s
Apply an established route map to either incoming or outbound routes of a BGP neighbor or c peer
group.
Syntax
neighbor [ip-address | peer-group-name] route-map map-name [in | out]
To remove the route map, use the no neighbor [ip-address | peer-group-name] route-map
map-name [in | out] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor to remove the private AS numbers.
peer-group-name
(OPTIONAL) Enter the name of the peer group to remove the private AS numbers
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name
(OPTIONAL) Enter the name of the peer group.
map-name
Enter the name of an established route map.
If the Route map is not configured, the default is deny (to drop all routes).
in Enter the keyword in to filter inbound routes.
out Enter the keyword out to filter outbound routes.