Reference Guide

Border Gateway Protocol | 375
Related
Commands
Command
History
show ip bgp cluster-list
c e
t
s
View BGP neighbors in a specific cluster.
Syntax
show ip bgp ipv4 multicast cluster-list [cluster-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp community
c e s z
View information on all routes with Community attributes or view specific BGP community groups.
Syntax
show ip bgp ipv4 multicast community [community-number] [local-as] [no-export]
[no-advertise]
Table 8-17. show ip bgp Command Example Fields
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination network.
show ip bgp community View BGP communities.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
Version 7.8.1.0 Introduced support on S-Series
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series