Reference Guide

382 | Border Gateway Protocol
www.dell.com | support.dell.com
Example
Figure 8-31. Command Example: show ip bgp ipv4 multicast summary
Table 8-19. Command Example fields: show ip bgp ipv4 multicast summary
Field Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries and route paths and the amount of
memory used to process those entries.
BGP path attribute entries Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH entries Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
BGP community entries Displays the number of BGP COMMUNITY attributes processed and the
amount of memory used to process them. The show ip bgp community
command provides more details on the COMMUNITY attributes.
Dampening enabled Displayed only when dampening is enabled. Displays the number of paths
designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that neighbor.
If a number appears in parentheses, the number represents the number of
messages waiting to be sent to the peer group.
Up/Down Displays the amount of time (in hours:minutes:seconds) that the neighbor is in
the Established stage.
If the neighbor has never moved into the Established stage, the word never is
displayed.
State/Pfx If the neighbor is in Established stage, the number of network prefixes received.
If a maximum limit was configured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed (Idle,
Connect, Active, OpenSent, OpenConfirm) When the peer is transitioning
between states and clearing the routes received, the phrase (Purging) may
appear in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in this column.
FTOS#show ip bgp ipv4 multicast summary
BGP router identifier 100.10.10.1, local AS number 6400
BGP table version is 14, main routing table version 14
7 network entrie(s) and 7 paths using 972 bytes of memory
2 BGP path attribute entrie(s) using 112 bytes of memory
1 BGP AS-PATH entrie(s) using 35 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
25.25.25.25 6400 21 9 14 0 0 00:02:04 3
211.1.1.129 640 28 6 0 0 0 00:00:21 Active
FTOS#