Reference Guide

Border Gateway Protocol | 413
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out] command.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp notifications
c e
Allows you to view information about BGP notifications received from neighbors.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the
/x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the
/x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced