Reference Guide

42 | File Management
www.dell.com | support.dell.com
Example
Figure 3-4. Command output example (Partial): show file
Related
Commands
show file-systems
c e s
Display information about the file systems on the system.
Syntax
show file-systems
Command Modes
EXEC Privilege
Command
History
Example
Figure 3-5. Command Output example: show file-system
FTOS#show file flash://startup-config
!
boot system rpm0 primary ftp://test:server@10.16.1.144//home/images/
E1200_405-3.1.2b1.86.bin
boot system rpm0 secondary flash://FTOS-ED-6.1.1.0.bin
boot system rpm0 default ftp://:@/\
!
redundancy auto-synchronize persistent-data
redundancy primary rpm0
!
hostname E1200-20
!
enable password 7 94849d8482d5c3
!
username test password 7 93e1e7e2ef
!
enable restricted 7 948a9d848cd5c3
!
protocol spanning-tree 0
bridge-priority 8192
rapid-root-failover enable
!
interface GigabitEthernet 0/0
no ip address
shutdown
format (C-Series and E-Series)
Erase all existing files and reformat a filesystem on the E-Series or
C-Series platform.
format flash (S-Series)
Erase all existing files and reformat the filesystem in the internal
flash memory on and S-Series.
show file-systems
Display information about the file systems on the system.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
FTOS#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
63938560 51646464 dosFs2.0 MMC rw flash:
63938560 18092032 dosFs1.0 MMC rw slot0:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
FTOS#