Reference Guide

436 | Border Gateway Protocol
www.dell.com | support.dell.com
Command
History
show capture bgp-pdu neighbor
c e
Display BGP packet capture information for an IPv6 address on the E-Series.
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
show config
c e
View the current ROUTER BGP configuration.
Syntax
show config
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Example
Figure 1 show config Command Example (Partial)
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced
ipv6-address
Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced
capture bgp-pdu neighbor Enable capture of an IPv6 BGP neighbor packet.
clear ip bgp Specify a size for the capture buffer.
FTOS(conf-router_bgp)#show conf
!
router bgp 18508
neighbor RR-CLIENT peer-group
neighbor RR-CLIENT remote-as 18508
neighbor RR-CLIENT no shutdown
neighbor RR-CLIENT-PASSIV peer-group passive
neighbor RR-CLIENT-PASSIV remote-as 18508
neighbor RR-CLIENT-PASSIV subnet 9000::9:0/120
neighbor RR-CLIENT-PASSIV no shutdown
neighbor 1109::33 remote-as 18508
neighbor 1109::33 update-source Loopback 101
neighbor 1109::33 no shutdown
neighbor 2222::220 remote-as 18508
neighbor 2222::220 route-reflector-client
neighbor 2222::220 update-source Loopback 100
neighbor 2222::220 no shutdown
neighbor 4000::33 remote-as 18508
neighbor 4000::33 no shutdown
neighbor 4000::60 remote-as 18508
neighbor 4000::60 no shutdown
neighbor 9000::1:2 remote-as 640
no neighbor 9000::1:2 activate
neighbor 9000::1:2 no shutdown
!
FTOS#