Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 497
Default
None
Command History
disable
c s z
Disable DHCP Server.
DHCP Server is disabled by default. Enable the system to be a DHCP server using the no form of the
disable command.
Syntax
disable
Command Mode
CONFIGURATION
Default
Disabled
Command History
dns-server
c s z
Assign a DNS server to clients based on address pool.
Syntax
dns-server address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command History
domain-name
c s z
Assign a domain to clients based on address pool.
Syntax
domain-name name
Parameters
Command Mode
DHCP <POOL>
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on C-Series and S-Series.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter the a list of DNS servers that may service clients on the subnet. You may list up to 8
servers, in order of preference.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on C-Series and S-Series.
name
Give a name to the group of addresses in a pool.