Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 523
Parameters
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
Usage
Information
Since the Resilient Ring Protocol can potentially transmit 20 packets per interface, debug information
must be restricted.
description
c e s z
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-frrp)
Command
History
disable
c e s z
Disable the Resilient Ring Protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
event Enter the keyword event to display debug information related to ring
protocol transitions.
packet Enter the keyword packet to display brief debug information related to
control packets.
detail Enter the keyword detail to display detailed debug information related to
the entire ring protocol packets.
ring-id
(Optional) Enter the ring identification number.
Range: 1 to 255
count number Enter the keyword count followed by the number of debug outputs.
Range: 1 to 65534
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
Word
Enter a description of the ring.
Maximum: 255 characters
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced