Reference Guide

526 | Force10 Resilient Ring Protocol (FRRP)
www.dell.com | support.dell.com
Command
History
protocol frrp
c e s z
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION
Command
History
Usage
Information
This command places you into the Resilient Ring Protocol. After executing this command, the
command line prompt changes to conf-frrp.
show frrp
c e s z
Display the Resilient Ring Protocol configuration.
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
Command
History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
ring-id
Enter the ring identification number.
Range: 1 to 255
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
ring-id
Enter the ring identification number.
Range: 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a summarized
version of the Ring configuration.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced