Reference Guide

GARP VLAN Registration (GVRP) | 541
Example
Figure 16-2. show gvrp brief Command Example
Usage
Information
If no ports are GVRP participants, the message output changes from:
GVRP Participants running on <port_list>
to
GVRP Participants running on no ports
Related
Commands
show gvrp statistics
c e s z
Display the GVRP configuration statistics.
Syntax
show gvrp statistics {interface interface | summary}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
-------------------------------------------------------
Gi 3/0 Disabled No
Gi 3/1 Disabled No
Gi 3/2 Enabled No
Gi 3/3 Disabled No
Gi 3/4 Disabled No
Gi 3/5 Disabled No
Gi 3/6 Disabled No
Gi 3/7 Disabled No
Gi 3/8 Disabled No
R3#show gvrp brief
show gvrp statistics Display the GVRP statistics
interface interface Enter the keyword interface followed by one of the interface keywords and
slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by
the Port Channel number:
C-Series and S-Series Range: 1-128
E-Series Range: 1-32 for EtherScale, 1-255 for TeraScale
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on C, E, and S-Series