Reference Guide

552 | Internet Group Management Protocol (IGMP)
www.dell.com | support.dell.com
show ip igmp interface
c e s z
View information on the interfaces participating in IGMP.
Syntax
show ip igmp interface [interface]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
IGMP commands accept only non-VLAN interfaces—specifying VLAN will not yield a results.
Example
Figure 17-2. show ip igmp interface Command Example
interface
(OPTIONAL) Enter the interface type and slot/port information:
• For a 100/1000 Ethernet interface, enter the keyword
gigabitethernet followed by the
slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the
slot/port information.
• For a port-channel interface, enter the keyword
port-channel followed by the
port-channel number.
• For a Loopback interface, enter the keyword
loopback followed by a number from 0 to
16383.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by
the slot/port information.
• For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/
port information.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command
Note: The S4810 supports up to 95 interfaces.
FTOS#show ip igmp interface
GigabitEthernet 0/0 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/5 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/6 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/7 is up, line protocol is down
Internet protocol processing disabled
GigabitEthernet 7/9 is up, line protocol is up
Internet address is 10.87.5.250/24
IGMP is enabled on interface
IGMP query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP max query response time is 10 seconds
IGMP last member query response interval is 1000 ms
IGMP activity: 0 joins, 0 leaves
IGMP querying router is 10.87.5.250 (this system)
IGMP version is 2