Reference Guide

606 | Interfaces
www.dell.com | support.dell.com
show interfaces switchport
c e s z
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2
mode interfaces’ IEEE 802.1Q tag status and VLAN membership.
Syntax
show interfaces switchport [interface [linecard slot-number] | stack-unit unit-id ]
Parameters
Command Modes
EXEC
EXEC Privilege
Command History
interface
Enter one of the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For a port channel interface, enter the keyword
port-channel followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and ExaScale
• For SONET interfaces, enter the keyword
sonet followed by the slot/port
information. This keyword is only available on E-Series and C-Series.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• Enter the keyword
backup to view the backup interface for this interface.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/
port information.
linecard
slot-number
(OPTIONAL) Enter the keyword linecard followed by the slot number. This option is
available only on E-Series and C-Series.
C-Series Range: 0-7 for C300; 0–3 for C150
E-Series Range: 0 to 13 on the E1200, 0 to 6 on the E600, 0 to 5 on the E300
stack-unit
unit-id
(OPTIONAL) Enter the keyword stack-unit followed by the stack member number. This
option is available only on S-Series.
Unit ID range:
S4810: 0-11
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Support for 4093 VLANs on E-Series ExaScale
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for hybrid port/native VLAN, introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command