Reference Guide

Interfaces | 607
Example
Figure 18-38. show interfaces switchport Command Example
Related
Commands
show interfaces transceiver
ces z
Display the physical status and operational status of an installed transceiver. The output also displays
the transceiver’s serial number.
Syntax
show interfaces [gigabitethernet | tengigabitethernet | fortyGigE] slot/port transceiver
Parameters
Table 18-9. Items in show interfaces switchport Command Example
Items Description
Name Displays the interface’s type, slot and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid
(“Hybrid”, which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1,
this field can display native VLAN membership by port 13/0.
FTOS#show interfaces switchport
Name: GigabitEthernet 13/0
802.1QTagged: Hybrid
Vlan membership:
Vlan 2, Vlan 20
Native VlanId: 20
Name: GigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: GigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan 2
Name: GigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--
interface Configure a physical interface on the switch.
show ip interface Displays Layer 3 information about the interfaces.
show interfaces Display information on a specific physical interface or virtual interface.
show interfaces transceiver Display the physical status and operational status of an installed transceiver.
The output also displays the transceiver’s serial number.
gigabitethernet For a 10/100/1000 interface, enter the keyword gigabitethernet followed
by the slot/port information.