Reference Guide

IPv4 Routing | 633
Command History
Usage Information
Retries are 20 seconds apart.
Related
Commands
arp timeout
c e s z
Set the time interval for an ARP entry to remain in the ARP cache.
Syntax
arp timeout minutes
To return to the default value, enter no arp timeout.
Parameters
Defaults
240 minutes (4 hours)
Command Modes
INTERFACE
Command History
Related
Commands
clear arp-cache
c e s z
Clear the dynamic ARP entries from a specific interface or optionally delete (no-refresh) ARP entries
from CAM.
Syntax
clear arp-cache [vrf name | interface | ip ip-address] [no-refresh]
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0 Introduced
arp backoff-time Set the backoff timer for repeat ARPs.
seconds
Enter the number of minutes.
Range: 0 to 35790.
Default: 240 minutes.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
show interfaces Displays the ARP timeout value for all available interfaces.