Reference Guide

664 | IPv4 Routing
www.dell.com | support.dell.com
Example
Figure 19-11. show ip cam summary Command Example
C Displays the CPU bit.
1 indicates that a packet hitting this entry is forwarded to the CP or RP2, depending on
Egress port.
Next-Hop Displays the next hop IP address of the entry.
VId Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Mac Addr Displays the next-hop router’s MAC address.
Port Displays the egress interface. Use the second half of the entry to determine the interface.
For example, in the entry 17cl CP, the CP is the pertinent portion.
CP = control processor
RP2 = route processor 2
Gi = Gigabit Ethernet interface
So = SONET interface
Te = 10 Gigabit Ethernet interface
Table 19-7. show ip cam Command Example Fields (continued)
Field Description
FTOS#show ip cam linecard 4 port-set 0 summary
Total Number of Routes in the CAM is 13
Total Number of Routes which can be entered in CAM is 131072
Prefix Len Current Use Initial Sz
---------- ----------- ----------
32 7 37994
31 0 1312
30 0 3932
29 0 1312
28 0 1312
27 0 1312
26 0 1312
25 0 1312
24 6 40610
23 0 3932
22 0 2622
21 0 2622
20 0 2622
19 0 2622
18 0 1312
17 0 1312
16 0 3932
15 0 1312
14 0 1312
13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
FTOS#