Reference Guide

IPv4 Routing | 665
show ip cam stack-unit
s Z
Display content-addressable memory (CAM) entries for an S-Series switch.
Syntax
show ip cam stack-unit id port-set pipe-number [ip-address mask [longer-prefixes] | summary]
Parameters
Command Modes
EXEC
EXEC Privilege
Command History
Example
Figure 19-12. show ip cam stack-unit Command Example
Table 19-8. show ip cam summary Command Example Fields
Field Description
Prefix Length Displays the prefix-length or mask for the IP address configured on the linecard 0 port pipe
0.
Current Use Displays the number of routes currently configured for the corresponding prefix or mask on
the linecard 0 port pipe 0.
Initial Size Displays the CAM size allocated by FTOS for the corresponding mask. The CAM size is
adjusted by FTOS if the number of routes for the mask exceeds the initial allocation.
id
Enter the stack-unit ID.
Unit ID range:
S4810: 0-11
all other S-Series: 0-7
pipe-number
Enter the number of the Port-Pipe number.
S50n, S50V range: 0 to 1; S25N, S25P, S25V range: 0 to 0
ip-address mask
[
longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route
only.
Enter the keyword
longer-prefixes to view routes with a common prefix.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and
the total number routes which can be entered in to CAM.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.7.1.0 Modified: Added support for up to seven stack members.
Version 7.6.1.0 Introduced on S-Series
FTOS#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes
Destination EC CG V C VId Mac-Addr Port
----------------- -- -- - - ----- ----------------- -------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00 3f01 CP
FTOS#