Reference Guide

686 | Link Aggregation Control Protocol (LACP)
www.dell.com | support.dell.com
Parameters
Defaults
Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
debug lacp
c e s z
Debug LACP (configuration, events etc.)
Syntax
debug lacp [config | events | pdu [in | out | [interface [in | out]]]]
To disable LACP debugging, use the no debug lacp [config | events | pdu [in | out | [interface [in |
out]]]]
command.
Parameters
port-channel-number
Enter a port-channel number:
C-Series and S-Series Range: 1 to 128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512
for ExaScale.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced on E-Series
show lacp Display the lacp configuration
config (OPTIONAL) Enter the keyword config to debug the LACP configuration.
events (OPTIONAL) Enter the keyword events to debug LACP event information.
pdu in | out (OPTIONAL) Enter the keyword pdu to debug LACP Protocol Data Unit
information. Optionally, enter an
in or out parameter to:
• Receive enter
in
• Transmit enter out