Reference Guide

Layer 2 | 745
Command Modes
EXEC
EXEC Privilege
Command
History
show cam maccheck linecard
c
Display the results of the BCMI2 check command.
Syntax
show cam maccheck linecard slot port-set port-pipe
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
pre-Version 6.2.1.1 Introduced on E-Series
linecard slot (REQUIRED) Enter the keyword linecard followed by a slot number to
select the linecard for which to gather information.
C300 range: 0 to 7; C150 range: 0 to 4
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number
to select the Port-Pipe for which to gather information.
Range: 0 or 1
Version 7.6.1.0 Introduced on C-Series