Reference Guide

Layer 2 | 747
show cam mac linecard (dynamic or static)
c e
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr | dynamic |
interface
interface | static | vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
linecard slot (REQUIRED) Enter the keyword linecard followed by a slot number to
select the linecard for which to gather information.
C-Series Range: 0 to 4 (C150); 0 to 8 (C300)
E-Series Range: 0 to 6
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number
to select the Port-Pipe for which to gather information.
Range: 0 or 1
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
static (OPTIONAL) Enter the keyword static to display only those MAC address
specifically configured on the switch.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
Version 7.5.1.0 Added support for C-Series
pre-Version 6.2.1.1 Introduced on E-Series