Reference Guide

760 | Layer 2
www.dell.com | support.dell.com
Example
Figure 22-9. show vlan Command Example
Table 22-4. show vlan Information
Column Heading Description
(Column 1 — no heading) asterisk symbol (*) = Default VLAN
G = GVRP VLAN
P = primary VLAN
C = community VLAN
I = isolated VLAN
NUM Displays existing VLAN IDs.
Status
Displays the word
Inactive for inactive VLANs and the word
Active for active VLANs.
Q
Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T
for tagged interface, U (for untagged interface), x (uncapitalized x) for
Dot1x untagged, or
X (capitalized X) for Dot1x tagged.
Ports
Displays the type, slot, and port information. For the type, Po = port
channel,
Gi = gigabit ethernet, and Te = ten gigabit ethernet.
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
2 Active U Po1(Gi 13/0)
T Po20(Gi 13/6), Gi 13/25
T Gi 13/7
3 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/1
4 Active U Po2(Gi 13/2)
T Po20(Gi 13/6)
T Gi 13/7
5 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/3
6 Active U Po3(Gi 13/4)
T Po20(Gi 13/6)
T Gi 13/7
7 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/5
P 100 Active T Po1(Gi 0/1)
T Gi 0/2
C 101 Inactive T Gi 0/3
I 102 Inactive T Gi 0/4
FTOS#