Reference Guide

792 | Multicast Source Discovery Protocol (MSDP)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Related
Commands
ip msdp default-peer
e z
Define a default peer from which to accept all Source-Active (SA) messages.
Syntax
ip msdp default-peer peer address [list name]
To remove the default peer, use the no ip msdp default-peer {peer address} list name command.
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
Usage
Information
If a list is not specified, all SA messages received from the default peer are accepted. You can enter
multiple default peer commands.
ip msdp log-adjacency-changes
e z
Enable logging of MSDP adjacency changes.
Syntax
ip msdp log-adjacency-changes
To disable logging, use the no ip msdp log-adjacency-changes command.
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
Version 8.3.11.1 Introduced n the Z9000
Version 8.3.7.1 Introduced on the S4810
Version 7.4.1.0 Introduced
show ip msdp sa-cache rejected-sa Description.
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
list name
Enter this keyword and specify a standard access list that contains the RP address
that should be treated as the default peer. If no access list is specified, then all SAs
from the peer are accepted.
Version 8.3.11.1 Introduced n the Z9000
Version 8.3.7.1 Introduced on the S4810
Version 7.8.1.0
Added the
list option, and removed the prefix-list option.
Version 6.2.1.1 Introduced
Version 8.3.11.1 Introduced n the Z9000