Reference Guide

840 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
description
c e s z
Add a description about the selected OSPF configuration.
Syntax
description description
To remove the OSPF description, use the no description command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER OSPF
Command
History
Related
Commands
distance
c e s z
Define an administrative distance for particular routes to a specific IP address.
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-list-name] command.
Parameters
Defaults
110
Command Modes
ROUTER OSPF
Command
History
description
Enter a text string description to identify the OSPF configuration (80 characters maximum).
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
show ip ospf asbr Display VLAN configuration.
weight
Specify an administrative distance.
Range: 1 to 255
Default: 110
ip-address
(OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, you must include the mask for that router address.
mask
(OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name
(OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Introduced on S-Series