Reference Guide

Open Shortest Path First (OSPFv2) | 877
Related
Commands
show ip ospf interface
c e s z
Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated.
Syntax
show ip ospf process-id interface [interface]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Network Mask Displays the network mask implemented on the area.
TOS Displays the TOS options. Option 0 is the only option.
Metric Displays the LSA metrics.
Table 27-9. Command Example Descriptions: show ip ospf process-id database
summary
Items Description
show ip ospf database Displays OSPF database information.
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For the null interface, enter the keyword
null followed by zero (0).
• For loopback interfaces, enter the keyword
loopback followed by a number from 0
to 16383.
• For Port Channel groups, enter the keyword
port-channel followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1-32 for EtherScale, 1-255 for TeraScale
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by the VLAN ID. The range is from 1
to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0
Introduced
process-id option, in support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series