Reference Guide

PIM-Sparse Mode (PIM-SM) | 899
Example
Figure 28-3. show ip pim interface Command Example
show ip pim neighbor
c e s z
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
EXEC
EXEC Privilege
Command
History
Table 28-1. show ip pim interface Command Example Fields
Field Description
Address Lists the IP addresses of the interfaces participating in PIM.
Interface List the interface type, with either slot/port information or ID (VLAN or
Port Channel), of the interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface
participating in PIM.
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this interface.
Query Intvl Displays the query interval for Router Query messages on that interface
(configured with ip pim query-interval command).
DR Prio Displays the Designated Router priority value configured on the interface
(ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
E600-7-RPM0#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
172.21.200.254 Gi 7/9 v2/S 0 30 1 172.21.200.254
172.60.1.2 Gi 7/11 v2/S 0 30 1 172.60.1.2
192.3.1.1 Gi 7/16 v2/S 1 30 1 192.3.1.1
192.4.1.1 Gi 13/5 v2/S 0 30 1 192.4.1.1
172.21.110.1 Gi 13/6 v2/S 0 30 1 172.21.110.1
172.21.203.1 Gi 13/7 v2/S 0 30 1 172.21.203.1
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.1 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series