Reference Guide

900 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Example
Figure 28-4. show ip pim neighbor Command Example
show ip pim rp
c e s z
View all multicast groups-to-RP mappings.
Syntax
show ip pim rp [mapping | group-address]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Table 28-2. show ip pim neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID (VLAN or
Port Channel), on which the PIM neighbor was found.
Uptime/expires Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
• S = source
FTOS#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
FTOS#
mapping (OPTIONAL) Enter the keyword mapping to display the multicast
groups-to-RP mapping and information on how RP is learnt.
group-address
(OPTIONAL) Enter the multicast group address mask in dotted decimal
format to view RP for a specific group.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.1 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series