Reference Guide

Control and Monitoring | 95
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
If you do not specify parameters and enter service timestamps, it appears as service
timestamps debug uptime in the running-configuration.
Use the show running-config command to view the current options set for the service
timestamps command.
show alarms
c e s z
View alarms for the RPM, SFMs, line cards and fan trays.
Syntax
show alarms [threshold]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
localtime (OPTIONAL) Enter the keyword localtime to include the localtime in the
timestamp.
msec (OPTIONAL) Enter the keyword msec to include milliseconds in the
timestamp.
show-timezone (OPTIONAL) Enter the keyword show-timezone to include the time zone
information in the timestamp.
uptime (OPTIONAL) Enter the keyword uptime to have the timestamp based on
time elapsed since system reboot.
Version 8.3.11.1 Introduced on the Z9000
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
threshold (OPTIONAL) Enter the keyword threshold to display the temperature
thresholds set for the line cards, RPM, and SFMs.
Version 8.3.11.1 Introduced on the Z9000
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command