Reference Guide

972 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command
History
Example
Figure 33-17. show qos qos-policy-output (E-Series, C-Series)
Example
Figure 33-18. show qos qos-policy-output (S4810)
show qos statistics
c e s z
View QoS statistics.
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
Defaults
No default behavior or values
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Introduced on C-Series and S-Series
pre-Version 6.1.1.1 Introduced on E-Series
FTOS#show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
FTOS#show qos qos-policy-output
Qos-policy-output Customer1
Wred green Customer
Wred Ecn
wred-profile interface
Platform—E-Series and S4810 Only: Enter the keyword
wred-profile and optionally one of the following keywords and slot/port
or number information:
For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
interface
Enter one of the following keywords and slot/port or number information:
On the C-Series and E-Series, For a Fast Ethernet interface, enter the
keyword
FastEthernet followed by the slot/port information.
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.