Reference Guide

Control and Monitoring | 99
show command-tree
c e s z
Display the entire CLI command tree, and optionally, display the utilization count for each
commands and its options.
Syntax
show command-tree [count | no]
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
H
Usage
Information
Reload the system to reset the command-tree counters.
Example
FTOS#show command-tree count
!
Enable privilege mode:
enable command usage:3
<0-15> option usage: 0
exit command usage:1
show command-tree command usage:9
count option usage: 3
show version command usage:1
!
Global configuration mode:
aaa authentication enable command usage:1
WORD option usage: 1
default option usage: 0
enable option usage: 0
line option usage: 0
none option usage: 0
radius option usage: 1
tacacs+ option usage: 0
show console lp
c e
View the buffered boot-up log of a line card.
Syntax
show console lp number
count Display the command tree with a usage counter for each command.
no Display all of the commands that may be preceded by the keyword no, which is
the keyword used to remove a command from the running-configuration.
Version 8.3.11.1 Introduced on the Z9000
Version 8.2.1.0 Introduced