Reference Guide

Type SubType TLV Description
127 8 Inventory — Serial Number Indicates the device serial
number of the LLDP-MED
device.
127 9 Inventory — Manufacturer
Name
Indicates the manufacturer
of the LLDP-MED device.
127 10 Inventory — Model Name Indicates the model of the
LLDP-MED device.
127 11 Inventory — Asset ID Indicates a user specified
device number to manage
inventory.
127 12–255 Reserved —
LLDP-MED Capabilities TLV
The LLDP-MED capabilities TLV communicates the types of TLVs that the endpoint device and the network connectivity
device support. LLDP-MED network connectivity devices must transmit the Network Policies TLV.
• The value of the LLDP-MED capabilities field in the TLV is a 2–octet bitmap, each bit represents an LLDP-MED
capability (as shown in the following table).
• The possible values of the LLDP-MED device type are shown in the following. The Dell Networking system is a
network connectivity device, which is Type 4.
When you enable LLDP-MED in FTOS (using the advertise med command), the system begins transmitting this TLV.
Figure 62. LLDP-MED Capabilities TLV
Table 23. FTOS LLDP-MED Capabilities
Bit Position TLV FTOS Support
0 LLDP-MED Capabilities Yes
1 Network Policy Yes
2 Location Identification Yes
3 Extended Power via MDI-PSE Yes
4 Extended Power via MDI-PD No
5 Inventory No
6–15 reserved No
406