Reference Guide

NOTE: When copying to a server, a host name can only be used if a DNS server is configured.

• Save the running-configuration to the startup-configuration on the internal flash of the primary RPM. Then copy the

new startup-config file to the external flash of the primary RPM.

EXEC Privilege mode

copy running-config startup-config duplicate

FTOS Behavior: If you create a startup-configuration on an RPM and then move the RPM to another chassis, the startup-

configuration is stored as a backup file (with the extension

.bak

), and a new, empty startup-configuration file is created.

To restore your original startup-configuration in this situation, overwrite the new startup-configuration with the original

one using the copy startup-config.bak startup-config command.

Configure the Overload Bit for a Startup Scenario

For information about setting the router overload bit for a specific period of time after a switch reload is implemented,

refer to the

Intermediate System to Intermediate System (IS-IS)

section in the

FTOS Command Line Reference Guide

Viewing Files

You can only view file information and content on local file systems.

To view a list of files or the contents of a file, use the following commands.

• View a list of files on the internal flash of an RPM.

EXEC Privilege mode

dir flash:

• View a list of files on the external flash of an RPM.

EXEC Privilege mode

dir slot:

• View the contents of a file in the internal flash of an RPM.

EXEC Privilege mode

show file rpm{0|1}flash://filename

• View the contents of a file in the external flash of an RPM.

EXEC Privilege mode

• View the running-configuration.

EXEC Privilege mode

show running-config

• View the startup-configuration.

EXEC Privilege mode

show startup-config

The output of the dir command also shows the read/write privileges, size (in bytes), and date of modification for each

file.

Example of the dir Command

FTOS#dir

Directory of flash:

1 drw- 32768 Jan 01 1980 00:00:00 .

2 drwx 512 Jul 23 2007 00:38:44 ..

3 drw- 8192 Mar 30 1919 10:31:04 TRACE_LOG_DIR

4 drw- 8192 Mar 30 1919 10:31:04 CRASH_LOG_DIR

5 drw- 8192 Mar 30 1919 10:31:04 NVTRACE_LOG_DIR