Reference Guide

ManualsBrandsDell ManualsComputer equipmentForce10 Z9000

661

662

663

664

665

666

667

668

669

670

Table 48. MIB Objects for Viewing the System Image on Flash Partitions

MIB Object OID Description MIB

chSysSwInPartitionAImgVe

1.3.6.1.4.1.6027.3.10.1.2.8.1.11 List the version string of the

system image in Flash

Partition A.

Chassis MIB

chSysSwInPartitionBImgVe

1.3.6.1.4.1.6027.3.10.1.2.8.1.12 List the version string of the

system image in Flash

Partition B.

Chassis MIB

The system image can also be retrieved by performing an SNMP walk on the following OID: MIB Object is

chSysSwModuleTable and the OID is 1.3.6.1.4.1.6027.3.10.1.2.8.

Example of Deriving the Interface Index Number

FTOS#show interface gig 1/21

GigabitEthernet 1/21 is up, line protocol is up

Hardware is Force10Eth, address is 00:01:e8:0d:b7:4e

Current address is 00:01:e8:0d:b7:4e

Interface index is 72925242

[output omitted]

Monitor Port-Channels

To check the status of a Layer 2 port-channel, use f10LinkAggMib (.1.3.6.1.4.1.6027.3.2). In the following example, Po 1 is

a switchport and Po 2 is in Layer 3 mode.

Example of SNMP Trap for Monitored Port-Channels

[senthilnathan@lithium ~]$ snmpwalk -v 2c -c public 10.11.1.1 .

1.3.6.1.4.1.6027.3.2.1.1

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.2 = INTEGER: 2

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.1 = Hex-STRING: 00 01 E8 13 A5 C7

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.2 = Hex-STRING: 00 01 E8 13 A5 C8

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.1 = INTEGER: 1107755009

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.2 = INTEGER: 1107755010

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.1 = INTEGER: 1

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.2 = INTEGER: 1

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.1 = Hex-STRING: 00 00

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.2 = Hex-STRING: 00 00

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.1 = STRING: "Gi 5/84 "

<< Channel member

for Po1

SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.2 = STRING: "Gi 5/85 " << Channel member

for Po2

dot3aCommonAggFdbIndex

SNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.1.1107755009.1 = INTEGER: 1107755009

dot3aCommonAggFdbVlanId

SNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.2.1107755009.1 = INTEGER: 1

dot3aCommonAggFdbTagConfig

SNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.3.1107755009.1 = INTEGER: 2

(Tagged 1 or

Untagged 2)

dot3aCommonAggFdbStatus

SNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.4.1107755009.1 = INTEGER: 1 << Status

active, 2 – status inactive

If we learn MAC addresses for the LAG, status is shown for those as well.

664