Reference Guide

• Execute a specified bShell command from the CLI without going into the bShell.
show hardware stack-unit {0-11} unit {0-1} execute-shell-cmd {command}
• View the Multicast IPMC replication table from the bShell.
show hardware stack-unit {0-11} unit {0-1} ipmc-replication
• View the internal statistics for each port-pipe (unit) on per port basis.
show hardware stack-unit {0-11} unit {0-1} port-stats [detail]
• View the stack-unit internal registers for each port-pipe.
show hardware stack-unit {0-11} unit {0-1} register
• View the tables from the bShell through the CLI without going into the bShell.
show hardware stack-unit {0-11} unit {0-1} table-dump {table name}
The Z9000 supports thirty–two 40G ports or one-hundred twenty–eight 10G ports on four port-pipes, which are also
called units. The system displays internal port numbers, not the external port numbers that you see. For information that
maps the internal unit port number with the port-pipe unit for the 40G (highlighted lines only) and 10G ports (all lines),
refer to the following table.
Table 53. Cross-Reference of Internal Port Numbers to User Port Numbers
Internal Unit
Port Number
User Ports
from 0 to 31 on
Unit 0
User Ports
from 32 to 63
on Unit 1
User Ports
from 64 to 95
on Unit 2
User Ports
from 96 to 127
on Unit 3
No User Ports
on Unit 4
No User Ports
on Unit 5
1 0 32 64 96 Internal Internal
2 1 22 65 97 Internal Internal
3 2 34 66 98 Internal Internal
4 3 35 67 99 Internal Internal
5 4 36 68 100 Internal Internal
6 5 37 69 101 Internal Internal
7 6 38 70 102 Internal Internal
8 7 39 71 103 Internal Internal
9 8 40 72 104 Internal Internal
10 9 41 73 105 Internal Internal
11 10 42 74 106 Internal Internal
12 11 43 75 107 Internal Internal
13 12 44 76 108 Internal Internal
14 13 45 77 109 Internal Internal
15 14 46 78 110 Internal Internal
16 15 47 79 111 Internal Internal
17 16 48 80 112 Internal Internal
18 17 49 81 113 Internal Internal
19 18 50 82 114 Internal Internal
20 19 51 83 115 Internal Internal
769