Administrator Guide

ManualsBrandsDell ManualsComputer equipmentForce10 Z9000

1001

Table Of Contents

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

Version 6.5.1.0 Introduced.

Commands

protocol spanning-tree mstp — enters MULTIPLE SPANNING TREE mode.

forward-delay

The amount of time the interface waits in the Blocking State and the Learning State before transitioning

to the Forwarding State.

Z9000

Syntax

forward-delay seconds

To return to the default setting, use the no forward-delay command.

Parameters

seconds Enter the number of seconds the interface waits in the

Blocking State and the Learning State before transiting to the

Forwarding State. The range is from 4 to 30. The default is 15

seconds.

Defaults 15 seconds

Command

Modes

MULTIPLE SPANNING TREE

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.