Administrator Guide

Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
show ip pim tib — shows the PIM tree information base.
ip mroute
Assign a static mroute.
Z9000
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {
ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute
destination mask command.
Parameters
destination Enter the IP address in dotted decimal format of the
destination device.
mask Enter the mask in slash prefix formation ( /x ) or in dotted
decimal format.
null 0 (OPTIONAL) Enter the keyword null then zero (0).
[protocol
[process-id |
tag] ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted
decimal format of the reverse path forwarding (RPF)
neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the IP
address in dotted decimal format of the RPF neighbor.
the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the
RPF neighbor.
static ip-
address
(OPTIONAL) Enter the Static IP address in dotted decimal
format of the RPF neighbor.
1020
Multicast