Administrator Guide

Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the E-Series.
ftp-server username — sets a username and password for incoming FTP
connections to the E-Series.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Z9000
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username command.
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-
type
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Control and Monitoring
103