Administrator Guide

show crypto ipsec sa ipv6 – displays the security associations set up for OSPFv3
interfaces in encryption policies.
ipv6 ospf graceful-restart helper-reject
Configure an OSPFv3 interface to not act upon the Grace LSAs that it receives from a restarting OSPFv3
neighbor.
Z-Series
Syntax
ipv6 ospf graceful-restart helper-reject
To disable the helper-reject role, enter no ipv6 ospf graceful-restart
helper-reject.
Defaults The helper-reject role is not configured.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1.
(0.0)
Introduced on the S4810 and Z9000.
Version 8.4.2.2 Introduced on E-Series TeraScale.
Version
8.3.19.0
Introduced on the S4820T.
Usage
Information
By default, OSPFv3 graceful restart is disabled and functions only in a helper role to
help restarting neighbor routers in their graceful restarts when it receives a Grace
LSA.
When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs
that it receives from a restarting OSPFv3 neighbor.
The graceful-restart role command is not supported in OSPFv3. When you enable
the helper-reject role on an interface, you reconfigure an OSPFv3 router to
function in a “restarting-only” role.
ipv6 ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
Z-Series
Syntax
ipv6 ospf hello—interval seconds
Open Shortest Path First (OSPFv2 and OSPFv3)
1125