Administrator Guide

Inter Area Pfx LSA Count 1
Inter Area Rtr LSA Count 0
Group Mem LSA Count 0
Type-7 LSA count 0
Intra Area Pfx LSA Count 2
Intra Area TE LSA Count 2
Area 1 database summary
Type Count/Status
Brd Rtr Count 1
AS Bdr Rtr Count 1
LSA count 8
Rtr LSA Count 1
Net LSA Count 0
Inter Area Pfx LSA Count 5
Inter Area Rtr LSA Count 0
Group Mem LSA Count 0
Type-7 LSA count 0
Intra Area Pfx LSA Count 2
Intra Area TE LSA Count 2
E1200-T2C2#sh ipv6 ospf neighbor
Neighbor ID Pri State Dead Time Interface
ID
Interface
63.114.8.36 1 FULL/DR 00:00:37 4 Gi 9/0
show ipv6 ospf interface
View OSPFv3 interface information.
Z9000
Syntax
show ipv6 ospf [interface]
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel
and a number. The range is from 1 to 128.
• For a Tunnel interface, enter the keywords tunnel and a
number. The range is from 1 to 16383.
• For a VLAN, enter the keyword vlan and a number from
1 to 4094.
Defaults none
Command
Modes
EXEC
1138
Open Shortest Path First (OSPFv2 and OSPFv3)