Administrator Guide

ipv6 pim bsr-border
Invoke IPv6 PIM debugging.
Z9500
Syntax
debug ipv6 pim [bsr | events | group group | packet | register
[group] | state | | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim command.
Parameters
bsr (OPTIONAL) Enter the keyword bsr to invoke debugging of
IPv6 PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword events to invoke debugging
of IPv6 PIM events.
group group (OPTIONAL) Enter the keyword group then the group
address to invoke debugging on that specific group.
packet (OPTIONAL) Enter the keyword packet to invoke debugging
of IPv6 PIM packets.
register [group] (OPTIONAL) Enter the keyword register and optionally the
group address to invoke debugging of IPv6 PIM register
messages for a particular group.
state (OPTIONAL) Enter the keyword state to view IPv6 PIM state
changes.
timer [assert |
hello |
joinprune |
register]
(OPTIONAL) Enter the keyword timer to view IPv6 PIM
timers. Enter one of the optional parameters:
• assert: to view the assertion timer
• hello: to view the IPv6 PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Defaults Disabled.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0) Introduced on the Z9500.
PIM-Sparse Mode (PIM-SM)
1179